How to Install a Flag Pole Base

Approximately half of Americans have an American flag placed inside or outside their house. American flags not only display patriotism but also celebrate holidays such as July 4th, MLK Day, and Veteran’s day. If you want to show support for these national holidays, a great way to do so is to put up an American flag, but first, you need to install a flag pole. 

If you’re unsure where to start, don’t worry with this guide, you can find out! From choosing your location to creating a strong foundation, you can learn how to install a flag pole base today!

Now, are you ready to get started? Here’s a quick look at flag pole installation: 

Choose a Location for the Flag Pole 

Before you pick a spot for your flag pole, it’s crucial that you consider these three factors: its visibility, how the wind interacts with your flag size as well as light sources. After all, you don’t want to choose a location where you can’t see it, but others can. So make sure you choose a location that’s by a window; that way, you can look at the American flag any time you’d like. 

Also, remember to examine locations where the wind tends to carry. That way, the wind can reach the flag pole in all directions making the flag fly. 

Now, if your flag is too small, the wind could overpower your flag. So it’s important to purchase a flag size that’s right for your lawn space. If you need to purchase a larger American flag. I American Flags has the best American flags for sale. 

To gain light sources, make sure you place your flag away from large objects like bushes, trees, or other buildings. By placing it far away, it will help your flag pole secure natural light. Once you’ve found the perfect spot, make sure to mark it so you don’t forget where it is. 

Make Sure It’s Safe to Dig 

Now that you have located where you want to put your flag pole, you may be tempted to just start digging but don’t. You see, there are many wires and important pipes buried underground that can be accidentally cut through or even damaged. So if you start digging, it’s not only dangerous but can have serious repressions such as loss of power, broken electricity sources, as well as damaged pipes. 

However, you can eliminate the risk simply by calling 811 or Call Before You Dig. Once you call them, Call Before You Dig will send out a technician to survey the area and ensure the location is safe for digging.  

When you get the green light, your can start digging your hole. Remember to dig the length of the ground sleeve plus more than four times the bottom diameter of the flagpole. That way, you have enough room to work.   

Create the Foundation   

Once you’ve dug your hole, it’s time to create a foundation for the base. Start by placing at least six inches of gravel at the bottom of the hole. Then set the ground sleeve in the middle and secure it. 

Now, it’s time to mix your cement and start shoveling it into the hole around the ground sleeve. Stop shoveling cement when the hole is filled one or two inches below ground level. All you have to do next is add top soil so the grass will grow around the pole, and then you’re done.  

Install a Flag Pole Base Today 

Installing a flag pole base may sound difficult, but it’s not. All you have to do is choose a location, ensure the location is safe for digging, then create the foundation for the flag pole.  

It takes less than two days time, so it’s the perfect weekend project. Plus, once you’re done, you can marvel at the beauty of the flying flag. 

Now, if you’d like more information about lawn accessories, check out some of our other articles on lawn and gardening. See you there!