Photo from Unsplash

Originally Posted On: https://www.sedonawaterproofing.com/10-signs-you-need-a-new-sump-pump/

60 percent of American homes have wet basements. More than half of those basements run the risk of getting basement mold.

If you’ve got a soggy basement, the issue could be with your current sump pump. Either your sump pump can’t keep up with the amount of water coming into the pit, or it’s not working properly at all.

But how can you be sure that the problem is really your old sump pump and that it’s time for a new one? Read on for ten tell-tale signs that it’s time to shop for a new sump pump.

1. The Sump Pump Makes Strange Noises

If you’ve been hearing loud sounds coming from your sump pump, it may be a sign that certain components within the equipment are worn out. It could also indicate that something inside your sump pump is damaged. In most cases, the culprit is the fan or the propeller.

Take note of excessive vibrating too. It could signal trouble with the sump pump’s impeller. Depending on the extent of the damage, it may be time to consider a sump pump replacement.

2. Your Sump Pump Doesn’t Stop Running

A sump pump that won’t stop running can indicate that the equipment has an issue with the switch. The problem could also be that the float arm mechanisms have been failed. Both of these issues may be triggered by a problematic power source or when the pump shifts within the basin and causes the float to be unresponsive.

Sometimes the sump pump won’t stop running because it lacks the capacity to accommodate your home’s needs. In times of flooding, such a sump pump won’t have the power to handle all that extra water. That’s why you need to start planning for a replacement sump pump right away.

3. The Equipment Cycles On and Off Repeatedly

If your sump pump won’t stop cycling on and off, even during times of heavy rains, it may have a float switch problem. It might be that there’s an electrical short somewhere in your home that has interfered with the sump pump’s wiring.

This is an issue that calls for an expert to examine the equipment and determine whether you need to replace it right away.

4. The Sump Pump Displays Visible Damage or Rust

Over time, most sump pumps turn rusty. That may be the result of corroded battery terminals. The battery spots you see may also be caused by bacteria buildup.

Generally, you don’t need to be worried about this issue posing a risk to your health. However, rust and bacteria buildup could deter water flow in your sump pumps drainage system. One of the best solutions to this problem is to replace the sump pump altogether.

5. The Sump Pump’s Motor Keeps Getting Material Stuck Inside

Your sump pump may suck up sediment. Over time, this sediment causes the motor to wear down prematurely.

One solution is to install a filter to keep debris from getting into the motor. The problem with these filters is that they require cleaning and replacing. The alternative is to replace the sump pump altogether.

6. You Hardly Use Your Sump Pump

A sump pump that’s hardly used has a greater likelihood of experiencing repair issues. Just like your car battery, your sump pump requires periodical use for its shelf life to remain intact.

Instead of staying in great shape, a sump pump in disuse will actually fail when the time it’s needed comes. Thus, if it’s been years since you last switched on your sump pump, the equipment may very well be in need of a replacement.

7. The Pump Was Installed Improperly

Sump pump installation should never be a DIY task unless you have the necessary training and experience. It’s always a great idea to work with a contractor. But not all contractors can guarantee a proper job when installing a sump pump.

If the sump pump in your home was already installed when you moved into the home, it might be a great idea to hire your own professional contractor to inspect it. The idea is to ensure that the equipment is the right size and that it’s functioning correctly.

If the inspection reveals problems with your current sump pump, you may need to get it replaced. Otherwise, you could be looking at a crawl space mold problem.

8. Your Sump Pump Is No Longer Working At All

Total sump pump failure may be the result of many issues, especially a motor that has completely broken down. Electrical problems are usually to blame. Sometimes, clogged or broken drain hoses are the culprits.

Notify an experienced plumber to investigate the root cause right away. If the sump can’t be saved, then you need to have it replaced.

9. You’ve Been Experiencing Repeated Power Failures

Your sump pump is part of your overall electrical system. That means power surges and outages can affect it. If these issues have been happening frequently in your home, you may want to check on your sump pump.

If your sump pump suddenly stops working during a power surge, there’s a good chance you’ll need to plan for a replacement.

10. The Sump Pump Is Old

The older a sump pump gets, the more frequently it experiences problems. The typical lifespan of these machines is 10 years. If your current one is already that old, it’s time to install a new one.

Get a New Sump Pump at the Right Time

Your sump pump is an essential component of your home, so you need to make sure it functions correctly at all times. Part of doing so is knowing when your current pump can no longer meet your home’s needs. Delaying to get a new sump pump when that time comes will only lead to water damage issues.

Are you interested in waterproofing solutions for your home? Please contact us today.